« Back to Navigation & GPS Mounts for Dual Sport Motorcycles
GPS Cables & Cases
CycoActive has the largest selection of GPS Units, GPS mounts, wiring kits, maps & map holders and accessories for motorcycle navigation. We carry Garmin, Touratech, RAM, SPOT, CycoActive and many other brands.
This kit contains everything you need to connect your 5V Mini USB powered GPS to your motorcycle and protect your connections from vibration.
More Information »
More Information »
We have installed a water-tight superseal connector about 18 inches from the GPS end. Thus the cable, which has an integral fuse in the positive conductor, can be connected directly to the battery and routed over the bike frame.
More Information »
More Information »
This cable has both the 9-pin serial (RS-232) interface connector and a cigarette lighter power adapter. Fits, GPS II/III/V, GPS 60, 76, 176, Streetpilot, StreetPilotIII.
More Information »
More Information »
This tough plastic cover will protect your Garmin GPSMAP 176 and 176C display. It snaps on and off with a satisfying snug click and will keep your GPS from being damaged while packed.
More Information »
More Information »
This Power Audio Cable has a 2.5mm female socket built into the cord. Power and ground connections are bare wires (black and red). Compatible with Touratech helmet speakers Part Number 065-0337.
More Information »
More Information »
This Touratech Carrying Case holds the Garmin StreetPilots very securely while packed in your panniers. Made by Kahedo in Germany, it has two zippered side pockets and an internal velcro strap to hold your GPS secure.
More Information »
More Information »
Rechargeable lithium battery offering 5-15 hours of use (depending on backlight settings)
More Information »
More Information »
This tough plastic cover will protect your Garmin GPSMAP 276C or 376C display. It snaps on and off with a satisfying snug click and will keep your 276C or 376C from being damaged while packed.
More Information »
More Information »
This kit contains everything you need to connect your GPS to your motorcycle: a 12V power cord (5.5 ft long), battery terminal connectors, a blade-type fuse kit with two 2A fuses, a cap for the plug, and a small container of dielectric grease.
More Information »
More Information »
This heavy-duty, waterproof fuse holder snaps securely closed and won't leak under any conditions or location. Uses the well-known "superseal" method to cinch closed under pressure to prevent water entry . The cover has a tab with a mounting hole for a screw or zip-tie. This fuseholder is properly isolated from both water and vibration making it appropriate for motorcycles, off-road vehicles and military applications.
More Information »
More Information »
Save your handheld GPS from some of the scuffs and scrapes it could pick up in the line of duty. This nylon carrying case protects your unit while in storage or in the field. Features a wide zippered opening and a belt loop for accessibility and portability.
More Information »
More Information »
Zumo cable with BMW plug installed. Buy it pre-assembled, or build your own from 030-0111+G10861
More Information »
More Information »
This is a simple cigarette lighter power adapter for the Garmin GPSMAP 276C and 376C. There are no connections to the audio output or other signals.
More Information »
More Information »
This will power your GPS from any common cigarette lighter. This power cable uses Garmin's 4-pin round power & interface connector found on many of their GPS units,
More Information »
More Information »
This kit contains everything you need to connect your GPS to your motorcycle: a 12V power cord (5.5 ft long), battery terminal connectors, a blade-type fuse kit with two 2A fuses, and a small container of dielectric grease.
More Information »
More Information »
Use Dielectric Grease on the terminals inside your battery case to help keep your contacts clean and in good operating order.
More Information »
More Information »
This cord functions as a 12/24-volt power adapter cable and has an external speaker built into the cigarette plug housing to dictate GPS guidance directions while driving. It allows you to power your unit from a cigarette lighter and hear the voice prompts. This is an excellent accessory to purchase if you have City Select or City Navigator software for your 276C or 376C and want to use the unit in your car.
More Information »
More Information »
This padded case fits the Garmin GPS II, II+, III, III+, V, Rino and GPSMAP 60 series.
More Information »
More Information »
This Cigarette Lighter Socket is good quality and includes a weatherproof cap, wiring with an inline fuse (and the cigarette lighter insert).
More Information »
More Information »
Removable Velcro cable tie e.g. to fix unused GPS cables to the handlebars. Velcro on both sides.
More Information »
More Information »
This convenient Garmin Carrying Case for StreetPilot GPS units lets you keep everything together in one handy case.
More Information »
More Information »