Shopping Cart

CycoActive
GPS Packages

Complete systems
designed for your
motorcycle

Garmin
GPS Receivers

Accessories

Mount Systems

Mount Gallery

Software

Accessories for Garmin e Series GPS

---

Availability: Backordered

12v Cigarette lighter adapter for Garmin eMap, Geko and eTrex Greyscale

• 12vDC input, 3vDC output
• Does NOT fit eTrex Legend C and Vista C

IMPORTANT NOTE: This adapter is extremely susceptible to vibration, often failing within the first few minutes of use on a single-cylinder motorcycle. For motorcycle applications we recommend G10203V (vibration-modified by CycoActive).

Availability: Not Normally Stocked

This PC Interface Cable has a 9-pin serial (RS232) connector on one end and the eMap or eTrex connector on the other.

This will NOT work with the new eTrex C models such as the eTrex Vista C or Legend C.

Availability: In Stock

Similar to the Handlebar mount GREMH except instead of the U-Bolt clamp it has a Suctioncup GRAST.

Availability: In Stock

Cradle for GARMIN eMap. Fits e-Map snug so it won't fly out. Use this cradle in conjunction with other RAM parts to mount to your car, bike, boat, whatever.

Availability: In Stock

Fits Greyscale eTrex ONLY. Does not fit COLOR eTrex

Availability: In Stock

This Garmin Y Cable allos you to power your GPS and connect to the serial port of your PC at the same time. Very helpful during those extended route planning sessions at home.

This cable does NOT fit eTrex Legend C and Vista C Color models.

The Video for Garmin eMap has been discontinued. They are no longer available.

Availability: In Stock

(does NOT fit eTrex LegendC and VistaC)

Availability: In Stock

part# gce3Vc

run-time of C-cells is 3 times longer than AA cells

recommended for motorcycle use to prevent vibration-induced shutdown and contamination of the internal AA terminals. This is a simpler option than using G10203V + g12vOUT + 030-0021.

cable approx 24 inches long

fits eMap, eTrex, Geko

keeps your AA batteries fresh for the trail.

better for continuous use of backlight at night.

the GPS automatically switches over to the internal AA batteries if the cable is unplugged.

FOUR-wire cable. which you can modify for data transfer.

Not required to have batteries inside the GPS.

available in kit form -(you attach the cord to the battery pack)

On dirtbikes, carry it in a Glovebox above the headlight.

Does NOT fit eTrex Legend C and Vista C

Availability: In Stock

This is the G10203, modified by CycoActive for better vibration resistance.

For Garmin eMap, and greyscale eTrex ONLY. This inexpensive modification is recommended for ALL motorcycle use. G10203 un-modified, will not survive on a single-cylinder motorcycle or 2-cyl motorcycle for more than a couple days. Does NOT fit color eTrex.

• 12vDC to 3vDC converter
• eMap
• eTrex greyscale

Availability: Backordered

Power supply not susceptible to vibration problems of the Garmin product (G10203). In-line 12vDC-to-3vdc reducer adapts to both Cigarette lighter and BMW plug.

NOTE: for Greyscale eTrex ONLY; does NOT fit eTrex Legend C and Vista C (Color screen)

fits eTrex and Geko perfectly.

For eMap please note----------->
a slight modification may be required.

For eMap, batteries are required for startup. Then the eMap senses external supply and switches to external power

for hardwire applications, the cigarette-lighter end can be cut off as long as the 12v-3v reducer circuit remains inline.

does NOT fit eTrex Legend C and Vista C

Availability: In Stock

Cable and battery case (you assemble)

• Red to red (+3v)
• black to black (neg)
• brown and white data wires are not used.

Availability: In Stock

Fits Color eTrex ONLY. Does not fit greyscale eTrex

Availability: In Stock

(does NOT fit eTrex with greyscale screens)

Availability: In Stock

This allows you to power your eTrex Color model GPS from the cigarette lighter in your car. It will work on your bike, but these units are definitely not waterproof.

Availability: In Stock

This is the RAM Handlebar Mount kit for the Garmin eTrex series of GPS units. This kit will fit only the original eTrex models, NOT the new Color models. The kit includes the cradle, a diamond base, medium arm and u-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger u-bolts are available for different handlebar diameters.

Availability: In Stock

This is the RAM Handlebar Mount kit for the new Garmin eTrex C models. These are the new Color eTrex models, not the original grayscale screens. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.

This RAM mount kit provides great flexibility in mounting your eTrex COLOR GPS. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.

NOTE: this mount does NOT fit the Greyscale eTrex, it is for the new eTrex series with COLOR display only.

Availability: In Stock

This is the RAM Handlebar Mount kit for the Garmin eMap. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.

Availability: In Stock

Crossbar mount (1/2")
Does NOT fit greyscale eTrex

• Constructed of Aluminum and Stainless Steel
• Very secure attachment
• Rubber vibration isolators
• Mounts to 1/2 inch crossbar
• Can be used with RAM arm 065-0040 (=grbh)
• Fits LegendC, Cx VistaC, Cx

Availability: Backordered

Key-Lock allows additional security when away from the bike, for example when paying for gasoline.

Crossbar mount (1/2")
Does NOT fit greyscale eTrex.

• Constructed of Aluminum and Stainless Steel
• Very secure attachment
• Rubber vibration isolators
• Mounts to 1/2 inch crossbar
• Can be used with RAM arm 065-0040 (=grbh)
• Fits LegendC, Cx VistaC, Cx