Shopping Cart

Touratech Mounts
for Garmin GPS

Touratech Mounts
for Magellan GPS

GPS Mount
Accessories

Mount Gallery

Availability: Backordered

Super MvG mount for GPS176 on single cylinder or unbalanced engines.

Availability: Backordered

Fits GPS 176 and 176c

very secure attachment

vibration buffers

all aluminium construction

integrates garmin powercord for power-up when inserted into the mount.

attaches to 1/2 inch crossbar

can be used with RAM arm 065-0040

Availability: In Stock

This adapter system gives you the flexibility you need to mount any computer, route chart holders, gps systems. Up or down, forward or backward, this mount fits anywhere. Great for working with tapered bars and or steering stabilizers. Extremely adjustable, perfect for our Touratech GPS mounts.

Verticals are 2.7 inches long and can be cut shorter. Comes with 4.5 inch horizontal (as shown) and a 10 inch bar too. Please see "Larger Image" link, for dimensions.

NOTE: does not include GPS mount . This adapter just provides a place for attaching Touratech mounts.

Click here to see GPS mounts

• M8 screws
• 4.5 inch horizontal
• 10 inch horizontal
• 2.7 inch verticals

Power and Wiring Options

Availability: In Stock

The Motorcycle 12v Hardwire Kit, for GPS III, V, SP, SPIII, 176, 176C, 60, 76 includes these items:

• GPS Power cord
• Waterproof fuse holder
• 2A fuses plus a spare
• Dielectric grease
• Powercord end holder
• Battery terminals
• Splice connector for large fuseholder to small red wire

This kit contains everything you need to connect your GPS to your motorcycle and protect your connections from vibration: a 12V power cord (5.5 ft long), battery terminal connectors, a blade-type fuse kit with two 2A fuses, a cap for the plug, and a small container of dielectric grease.

Fits the GPSs listed below:

• GPS II, II+, III, III+, V
• GPS12XL, 12MAP, 12CX (not GPS12)
• GPS 60, 72, 76
• GPSMAP 60, 60C, 60CS, 60Cx, 60CSx
• GPSMAP 76, 76S, 76C, 76CS, 76Cx, 76CSx
• GPSMAP 96, 96C
• GPSMAP 176, 176C, 196
• StreetPilot, StreetPilot Color
• StreetPilot III

Availability: In Stock

This interface cable has the traditional Garmin round 4-pin plug on one end and a 9-pin serial (RS-232) connector on the other. There is no connection for power. 3 wires inside (Data in, Data out, and ground), no provision for power.

Plug your Garmin GPS into your PC serial port to download maps and create routes and waypoints. Fits these GPSs:

• GPS 38, 40, 45, 45XL
• GPS II, II+, III, III+, V
• GPS 12, 12XL, 12MAP, 12CX
• GPSMAP all 60 series, C, CS, Cx, CSx
• GPSMAP all 72, 76 series, 76MAP, 76S
• GPSMAP all 76C, CS, Cx, CSx
• GPSMAP 176, 176C
• StreetPilot, StreetPilot Color
• StreetPilot III

Availability: In Stock

This cable has both the 9-pin serial (RS-232) interface connector and a cigarette lighter power adapter. Fits, GPS II/III/V, GPS 60, 76, 176, Streetpilot, StreetPilotIII.

Power your GPS from a 12v cigarette lighter supply while doing map and data transfers from your PC. Perfect for using connecting the GPS to your PC to enable the "Moving Map" function which is part of Garmin's MapSource software.

Availability: In Stock

This will power your GPS from any common cigarette lighter. This power cable uses Garmin's 4-pin round power & interface connector found on many of their GPS units.

• GPS II, II+, III, III+, V
• GPS12XL, 12MAP, 12CX (not GPS12)
• GPSMAP 60C, 60CS, 60Cx, 60CSx
• GPSMAP 76, 76MAP, 76S
• GPSMAP 76C, 76Cx 76CS 76CSx
• GPSMAP 176, 176C
• StreetPilot, StreetPilot Color, StreetPilot III