RAM Cradles and Mounting Accessories
|
 |
Here's a sample of many of the RAM parts available to mount your GPS or XM radio or Music Player on your motorcycle.
Click the picture for a larger view.
|
|
RAM Suction Cup Mount for the Garmin GPS 12
|
|
|
|
|
|
The RAM Suction Cup Mount for the Garmin GPS 12 has been discontinued. They are no longer available. |
|
RAM Suction Cup Mount for the Garmin eMap Greyscale
Part Number: GREMS |
$42.00 |
|
|
|
|
|
|
Similar to the Handlebar mount GREMH except instead of the U-Bolt clamp it has a Suctioncup GRAST.
|
|
RAM eMap cradle only
Part Number: GREMCR |
$12.00 |
|
|
|
|
|
|
Cradle for GARMIN eMap. Fits e-Map snug so it won't fly out. Use this cradle in conjunction with other RAM parts to mount to your car, bike, boat, whatever.
|
|
RAM Cradle for Garmin eTrex Greyscale
Part Number: GRETCR |
$12.00 |
|
|
|
|
|
|
Fits Greyscale eTrex ONLY. Does not fit COLOR eTrex
|
|
RAM Suction Cup Mount for Garmin eTrex Greyscale
Part Number: GRETS |
$42.00 |
|
|
|
|
|
|
(does NOT fit eTrex LegendC and VistaC)
|
|
RAM Cradle for Garmin eTrex Color
Part Number: GRETCCR |
$12.00 |
|
|
|
|
|
|
Fits Color eTrex ONLY. Does not fit greyscale eTrex
|
|
RAM Suction Cup Mount for Garmin eTrex Color
Part Number: GRETCS |
$42.00 |
|
|
|
|
|
|
(does NOT fit eTrex with greyscale screens)
|
|
RAM cupholder with swivel
Part Number: GRCUPCR |
$16.00 |
|
|
|
|
|
|
Cup holder for RAM 1-inch ball systems.
|
|
RAM bar mt for Magellan Explorist series
Part Number: GREXPH |
$39.00 |
|
|
|
|
|
|
Ram handlebar mount fits the Magellan Explorist 100, 200, 210, 300, 400, 500, 600
|
|
RAM bar mount for TomTom Rider
Part Number: GRTTRH |
$39.00 |
|
|
|
|
|
|
The kit includes the adapter, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM suction mount for TomTom Rider
Part Number: GRTTRS |
$42.00 |
|
|
|
|
|
|
The kit includes the mount adapter, a medium arm and the extremely strong RAM suction cup mount for use on GLASS windshields.
|
|
RAM bar mount for TomTom Go, Plus, 300 and 700
Part Number: GRTTGH |
$39.00 |
|
|
|
|
|
|
The kit includes the adapter, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM suction mount for TomTom Go, Plus, 300 and 700
Part Number: GRTTGS |
$42.00 |
|
|
|
|
|
|
The kit includes the mount adapter, a medium arm and the extremely strong RAM suction cup mount for use on GLASS windshields.
|
|
RAM cradle for TomTom Go, Plus, 300 and 700
Part Number: GRTTGCR |
$21.00 |
|
|
|
|
|
|
Cradle fits TomTom models: Go, Plus, 300 and 700
|
|
RAM twist-lock suction cup with 1" ball
Part Number: GRAST |
$18.00 |
|
|
|
|
The RAM twist-lock suction cup with 1" ball includes these items:
- Suction cup base
- GRAD diamond base
The RAM Suction Cup Mount Adapter has a 3.5 inch suction cup designed to attach to the inside of your car windshield. Plenty strong enough for larger GPSs.
Sticks very well to GLASS such as windshields. Makes it EASY to transfer a GPS or other device from car to car.
NOTE: apply with water
| |
|
Ram handlebar mount Garmin Nuvi 300 Series
Part Number: GRNUVIH |
$39.00 |
|
|
|
|
|
|
RAM Handlebar Mount kit for the Garmin Nuvi 300 Series The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.Note: this does not fit the newer 600 series Nuvi models
|
|
Cradle for Garmin Nuvi
Part Number: GRNUVICR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle ONLY for the Garmin Nuvi
|
|
RAM cradle for Magellan 12, 300, 315, 320
Part Number: GR300CR |
$12.00 |
|
|
|
|
|
|
RAM cradle ONLY for Magellan 300, 315, 320
|
|
RAM cradle for Magellan Explorist series
Part Number: GREXPCR |
$10.00 |
|
|
|
|
|
|
RAM cradle for Magellan Explorist series
|
|
RAM ball, Expanding mount (RAM-B-342)
Part Number: 068-0008 |
$16.80 |
|
|
|
|
|
|
Expanding mount for steering spindles. Large selection of rubber plugs allow it to fits almost any hole from 1/2" to 3/4" and 1-1/16" - 1-1/4".
|
|
RAM Reservoir Cover Center
Part Number: GRARCC |
$18.30 |
|
|
|
|
|
|
This adaptor fits over your existing reservoir cover. Made of Die Cast aluminum with an over molded rubber ball. Low cost, high quality.
Installation is simple and several lengths of metric hardware is included. Does not include any SAE hardware.
This item fits many different clutch and brake reservoir covers. Please review the compatibility guide if you are unsure about your application.
- Compatible with all RAM 1-inch ball parts
|
|
RAM Reservoir Cover Side
Part Number: GRARCS |
$16.70 |
|
|
|
|
|
|
This adaptor fits over your existing reservoir cover. Made of Die Cast aluminum with an over molded rubber ball. Low cost, high quality.
Installation is simple and several lengths of metric hardware is included. Does not include any SAE hardware.
This item fits many different clutch and brake reservoir covers. Please review the compatibility guide if you are unsure about your application.
- Compatible with all RAM 1-inch ball parts
|
|
RAM Handlebar Mount for Garmin GPS III and V
Part Number: GR3H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the GPS III or V series from Garmin. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM Cradle for Garmin 176, 176C, 276C, 376C
Part Number: GR176CR |
$12.00 |
|
|
|
|
|
|
This cradle fits the Garmin 176, 276, 376, 378 and 478 as well as aviation models 296, 396, and 496. For motorcycle use, we prefer using the Garmin cradle because the Garmin cradle has a safety lock. Attach part GRAB: (GRAB round base adapter) to the back of the Garmin cradle, for connection with the RAM system.
|
|
RAM Suction Cup Mount for Garmin GPS III and V
Part Number: GR3S |
$42.00 |
|
|
|
|
|
|
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This picture shows the basic suction cup kit for the GPS V. The kit includes the cradle, the diamond base, a medium arm and the suction cup mount.
This kit is designed to mount to the windshield of your car.
|
|
RAM Cradle for Garmin StreetPilot 2610, 2620, 2720, 2730, 2820
Part Number: GR26CR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle for the Garmin StreetPilot 2610 Series. The unit snaps securely around the GPS. This cradle, like all RAM cradles, is designed to attach to a RAM Diamond Base, part number GRAD, which has the ball required for use in a RAM mounting system.
You may want this part if you have the rest of a RAM mounting system and need to mount a Garmin StreetPilot 2610 series unit.
|
|
RAM Cradle for Garmin 76C, CS, Cx & CSx
Part Number: GR76CCR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle for the 76 color series; GPSMAP 76C, 76CS, 76Cx, and 76CSx. The GPS snaps securely into the cradle and stays there until you release it. This cradle is designed to attach to a RAM Diamond Base, part number GRAD, which has the ball required for use in a RAM mounting system.
This cradle will NOT fit the Garmin GPSMAP 72, 76 & 76S. This new color-screen GPS is a different size. If you have a 72, 76 or 76S click here for a RAM cradle that will fit your GPS.
|
|
RAM Handlebar Mount for Garmin Quest & Quest 2
Part Number: GRQSTH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin Quest and Quest 2. The kit includes a cradle, diamond base, a medium arm and a U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters. This mount accomodates the Garmin power cable and because it snaps securely over the top of the GPS, it is safe for motorcycle use.
This RAM mount kit provides great flexibility in mounting your Garmin Quest GPS. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM Cradle for Garmin 60C 60CS 60Cx & 60CSx
Part Number: GR60CR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle for the Garmin GPSMAP 60C series GPSs. The GPS snaps securely into the cradle and requires a firm push on the release button. This cradle is designed to attach to a RAM Diamond Base, part number GRAD, which has the ball required for use in a RAM mounting system.
You may need this part if you are building a custom mounting system for your GPS 60C, or if you have a RAM mounting system for another GPS and need to mount a 60C series GPS.
|
|
RAM Suction Cup Mount for Garmin Quest & Quest 2
Part Number: GRQSTS |
$42.00 |
|
|
|
|
|
|
This is the RAM Suction Cup Mount for the Garmin Quest and Quest 2. The kit includes a cradle, diamond base, medium arm and Suction Cup Windshield Mount. This suction cup mount will attach your Quest GPS to the windshield of your car. It is designed for glass, not a motorcycle windshield. This mount accomodates the Garmin power cable and because it snaps securely over the top of the GPS, it is safe for moderately rough use.
This RAM mount kit provides great flexibility in mounting your Garmin Quest GPS. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
Accomodates Garmin power cable
Cradle engages over the top of the GPS
Includes Suction Cup Mount for attaching to glass windshields
|
|
RAM Handlebar Mount for Garmin GPS 12
Part Number: GR12H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin GPS 12 unit. The kit includes the cradle, the diamond base, a medium arm and the u-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger u-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM Cradle for Garmin Quest
Part Number: GRQSTCR |
$12.00 |
|
|
|
|
|
|
Cradle ONLY for Garmin Quest
Accomodates GARMIN power cableCradle engages over the top of the GPS for better security on Motorcycles fits to Diamond base GRAD
|
|
RAM Cradle for Garmin GPS III and V
Part Number: GR3CR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle for the GPS II, II+, III, III+ and V series from Garmin. The unit snaps securely around the GPS and there is provision for a screw to attach the GPS and the cradle together. This cradle, like all RAM cradles, is designed to attach to a RAM Diamond Base, CycoActive part number GRAD, which has the ball required for use in a RAM mounting system.
You may want this part if you have the rest of a RAM mounting system and need to mount a GPS V series unit.
|
|
RAM Handlebar Mount for Garmin 60C 60CS 60Cx and 60CSx
Part Number: GR60H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount Kit for the Garmin GPSMAP 60C 60CS, 60Cx,& 60CSx. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM Cradle for Garmin 72, 76 & 76S (Greyscale)
Part Number: GR76CR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle for the Garmin GPSMAP 72, 76 and 76S. The GPS snaps securely into the cradle and stays there until you release it. This cradle is designed to attach to a RAM Diamond Base, part number GRAD, which has the ball required for use in a RAM mounting system.
You may need this part if you are building a custom mounting system for your GPS 76, or if you have a RAM mounting system for another GPS and need to mount a 72, 76 or 76S.
This cradle will NOT fit the new color-screen Garmin GPSMAP 76C & 76CS. They are not the same size. If you have a 76C or 76CS click here for a RAM cradle that will fit your GPS.
|
|
RAM Suction Cup Mount for Garmin 60C & 60CS
Part Number: GR60S |
$42.00 |
|
|
|
|
|
|
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This picture shows the basic suction cup kit for the GPSMAP 60C. The kit includes the cradle, the diamond base, a medium arm and the suction cup mount.
This kit is designed to mount to the windshield of your car.
|
|
RAM Handlebar Mount for Garmin 72, 76, 76S (Greyscale)
Part Number: GR76H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin GPSMAP 72, 76 and 76S model of GPS. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This mount will NOT fit the new color-screen Garmin GPSMAP 76C & 76CS. They are not the same size. If you have a 76C or 76CS click here for a RAM Mount that will fit your GPS.
|
|
RAM Cradle for Garmin Rino
Part Number: GRRCR |
$16.00 |
|
|
|
|
|
|
Includes new, larger engagement button and matching belt clip. Bolt spacing to fit item GRAD (or GRBH).
|
|
RAM Handlebar Mount for Garmin 76C, CS, Cx & CSx
Part Number: GR76CH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the 76 color series; GPSMAP 76C, 76CS, 76Cx, and 76CSx. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This mount will NOT fit the Garmin GPSMAP 72, 76 & 76S. This new color-screen GPS is a different size. If you have a 72, 76 or 76S click here for a RAM Mount that will fit your GPS.
|
|
RAM Cradle for Garmin C320, C330, C340
Part Number: GR330CR |
$19.00 |
|
|
|
|
|
|
This is the RAM Cradle ONLY for the Garmin StreetPilot C320, C330, C340 models. It comes with an attached 1" ball (GRAHEX) that fits with all 1” RAM arms (sold separately).
This mount is designed to accomodate the power cord that came with your Garmin receiver (must be disconnected from Garmin cradle)
|
|
RAM Handlebar Mount for Garmin 176, 176C, 276C, 376C
Part Number: GR176H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin 176, 276, 376, 378 and 478 as well as aviation models 296, 396, and 496. The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
NOTE: For motorcycle use we recommend the GRSP3H RAM Handlebar Mount kit. The GRSP3H uses the cradle from the Garmin supplied mount which has a safety-lock feature.
|
|
RAM Cradle for Rino 520, 530
Part Number: GRR5CR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle for the Garmin Rino 520 and 530. If you already own a RAM mount, this is most likely all you need to update it to hold the Rino 520 or 530.
|
|
RAM Handlebar Mount for Garmin eTrex Greyscale
Part Number: GRETH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin eTrex series of GPS units. This kit will fit only the original eTrex models, NOT the new Color models. The kit includes the cradle, a diamond base, medium arm and u-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger u-bolts are available for different handlebar diameters.
|
|
RAM Suction Cup Mount for Garmin StreetPilot III, 176, 276C, 376C
Part Number: GRSP3S |
$39.00 |
|
|
|
|
The RAM Suction Cup Mount for Garmin StreetPilot III, 176, 276C, 376C includes these items:
Suctioncup mounting system, Recommended for GLASS only. All parts are cast aluminum (or hard rubber). Mounts at any angle. This RAM suction cup mount kit fits Garmin's StreetPilot III cradle and Garmin's 176, 276, 376, 378 and 478 cradles. Made in USA
This is the correct RAM mount for Garmin "motorcycle brackets": (G10495 26XX series) and (G10610 Quest series)
| |
|
RAM Cradle for Magellan SportTrack
Part Number: GRSTKCR |
$12.00 |
|
|
|
|
|
|
bolts to GRAD
|
|
RAM Handlebar Mount for Garmin StreetPilot III, 176, 276C, 376C
Part Number: GRSP3H |
$39.00 |
|
|
|
|
|
|
This RAM Handlebar Mount kit fits Garmin's StreetPilot III cradle and Garmin's 176, 276, 376, 378 and 478 cradles. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This is the correct RAM mount for Garmin "motorcycle brackets": (G10495 26XX series) and (G10610 Quest series)
- U-bolt handlebar mount (GRAH)
- Medium arm (GRANA)
- Round base (GRAB)
|
|
RAM Cradle for Magellan Meridian
Part Number: GRMERCR |
$12.00 |
|
|
|
|
|
|
This is the RAM cradle ONLY for the Magellan Meridian.
|
|
RAM Handlebar Mount for Garmin eTrex Color
Part Number: GRETCH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the new Garmin eTrex C models. These are the new Color eTrex models, not the original grayscale screens. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This RAM mount kit provides great flexibility in mounting your eTrex COLOR GPS. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
NOTE: this mount does NOT fit the Greyscale eTrex, it is for the new eTrex series with COLOR display only.
|
|
RAM Handlebar Mount for Garmin eMap Greyscale
Part Number: GREMH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin eMap. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM Handlebar Mount for OLDER Garmin StreetPilot & StreetPilot Color
Part Number: GRSPH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin StreetPilot and StreetPilot Color. The kit includes the mount adapter, a medium arm and the U-bolt handlebar mount. The threaded screw holes in the backside of these older Garmin StreetPilot housings aren't very strong. For motorcycle use on rough roads we recommend that this mount should be epoxied to the GPS case, in addition to the screws. We have heard of good results using "JBWeld".
- Fits handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters
- Fits older StreetPilots (Greyscale and ColorMap). Does not fit StreetPilotIII or 2610.
|
|
RAM Suction Cup Mount for Garmin StreetPilot & StreetPilot Color
Part Number: GRSPS |
$42.00 |
|
|
|
|
|
|
This is the RAM SuvtioncupMount kit for the Garmin StreetPilot and StreetPilot Color. The kit includes the mount adapter, a medium arm and the Suctioncup mount for GLASS. The kit includes the mount adapter, a medium arm and the U-bolt handlebar mount. The threaded screw holes in the backside of these older Garmin StreetPilot cases aren't very strong. For motorcycle use we recommend that this mount should be epoxied to the GPS case, in addition to the screws. We have heard of good results using "JBWeld".
|
|
RAM Handlebar Mount for Garmin StreetPilot 2610, 2620, 2720, 2730, 2820
Part Number: GR26H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin StreetPilot 2610, 2620, 2720 models of GPS. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM Suction Cup Mount for Garmin StreetPilot 2610, 2620, 2720, 2730, 2820
Part Number: GR26S |
$42.00 |
|
|
|
|
|
|
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This picture shows the basic suction cup kit for the Garmin StreetPilot 2610 Series. The kit includes the cradle, the diamond base, a medium arm and the suction cup mount.
This kit is designed to mount to the windshield of your car.
|
|
RAM Handlebar Mount for Garmin Rino 110 & 120
Part Number: GRRH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin Rino 110 and 120. The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM Suction Cup Mount for Rino 110 & 120
Part Number: GRRS |
$46.00 |
|
|
|
|
|
|
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This is the basic suction cup kit for the Garmin Rino unit. The kit includes the cradle, the diamond base, a medium arm and the suction cup mount.
This kit is designed to mount to the windshield of your car.
|
|
RAM Handlebar Mount for Garmin Rino 520 & 530
Part Number: GRR5H |
$39.00 |
|
|
|
|
|
|
RAM handlebar mount for the Garmin Rino 520 and 530.
|
|
RAM Handlebar Mount Adapter
Part Number: GRAH |
$15.00 |
|
|
|
|
|
|
Universal U-Bolt adapter for all 1-inch RAM arms.
- Fits round bar 3/4 inch to 1 inch diameter
- 1 inch ball fits all RAM 1-inch clamps
- Cast aluminum
- See dimensions in links
- For 1.2 inch bar add larger U-bolt GCU1P2 (Pro-Taper or Magura)
- For 1.3 inch bar add larger U-bolt GCU1P3 (FatBar)
|
|
RAM Handlebar Mount for Apple iPod
Part Number: GRIPDH |
$39.00 |
|
|
|
|
|
|
This RAM Handlebar Mount holds the Apple iPod on your handlebars. Take your tunes with you wherever you go. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
- Dimensions: L: 4.0" xW: 2.44" x TH: 0.75"
- no lower port access (u-cut: 25" X 1.00")
This RAM Cradle is designed to hold the following Apple iPod units:
With Firewire Connection:
- Apple iPod 5GB
- Apple iPod 10GB
With Dock Connection:
- Apple iPod 10GB Generation 2
- Apple iPod 15GB Generation 2
- Apple iPod 30GB Generation 2
- Apple iPod 15GB Generation 3
- Apple iPod 20GB Generation 3
- Apple iPod 40GB Generation 3
|
|
RAM Handlebar Mount for Garmin iQue 3600
Part Number: GRIQH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Garmin iQue 3600 PDA/GPS. The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM Chrome Handlebar Mount Adapter
Part Number: GRAH-C |
$33.00 |
|
|
|
|
|
|
- Fits round bar 3/4 inch to 1 inch diameter
- 1 inch ball fits all RAM 1-inch clamps
- Cast aluminum with CHROME plating
- See dimensions in link at right ----->
|
|
RAM Crossbar Adapter for GRAH ( 068-0018 )
Part Number: GRAHA |
$4.00 |
|
|
|
|
|
|
Adapts GRAH U-bolt clamp to 1/2" bar. For 12mm bar (BMW), rubber spacer part is required. Rubber spacer may also be used with other bars for added vibration isolation. Made of solid, reinforced plastic.
|
|
RAM Suction Cup -DISCONTINUED, use part GRAST
|
|
|
|
 |
The RAM Suction Cup -DISCONTINUED, use part GRAST has been discontinued. They are no longer available. |
|
RAM Handlebar Mount for Garmin GPS 45 & 48
Part Number: GR45H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the GPS 45 or 48 from Garmin. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM Round Base Mount Adapter ( 068-0003)
Part Number: GRAB |
$12.00 |
|
|
|
|
|
|
This RAM Round Base Mount Adapter has a 2-7/16 round plate with several hole patterns to provide many mounting options.
Cast aluminum, black epoxy-coated.
- 2-7/16" diameter
- Standardized rectangular holepattern 1 1/2" X 1 3/16"
- Also has triangular pattern
|
|
RAM Handlebar Mount for Magellan 12, 300, 315, 320, 330 (not Roadmate)
Part Number: GR315H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Magellan 315, 320 and 330. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM Chrome Round Base Mount Adapter
Part Number: GRAB-C |
$30.00 |
|
|
|
|
|
|
Auminum with bright chrome plating - 2-7/16" diameter
- rectangular holepattern 1 1/2" X 1 3/16"
- also has triangular pattern
|
|
RAM Diamond Base Mount Adapter ( 068-0001 )
Part Number: GRAD |
$12.00 |
|
|
|
|
|
|
This RAM Diamond Base Mount Adapter is the standard attachment for RAM cradles. You can also use it in a custom mounting system.
- Fts all RAM one-inch ball clamps and accessories
- Hole-to-hole dimension is 48.5mm (=1.90 inches)
|
|
RAM Suction Cup Mount for the Magellan 12, 300, 315, 320, 330 (not Roadmate)
Part Number: GR315S |
$42.00 |
|
|
|
|
|
|
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This picture shows the basic RAM Suction Cup Mounting kit for the Magellan 315, 320 & 330. The kit includes the cradle, the diamond base, a medium arm and the suction cup mount.
This kit is designed to mount to the windshield of your car.
|
|
RAM Chrome Diamond Base Mount Adapter
Part Number: GRAD-C |
$24.00 |
|
|
|
|
|
|
- fits all RAM one-inch ball clamps and accessories
- Hole-to-hole dimension is 48.5mm (=1.90 inches)
|
|
RAM Mount Adapter with 11mm Hole
Part Number: GRAB11 |
$18.00 |
|
|
|
|
|
|
The RAM Mount Adapter with 11mm Hole is one of the most flexible adapters we carry for designing your own RAM mounting system. There is no end of places you can use one (or two) of these.
11mm hole = 7/16 inch
|
|
RAM Handlebar Mount for Magellan Meridian
Part Number: GRMERH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Magellan Meridian. The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM Angle Mount Adapter with 9mm Hole ( 068-0236 )
Part Number: GRAB9 |
$18.00 |
|
|
|
|
|
|
Fits all RAM 1 inch clamps.
- Aluminum
- Post angled 45 degrees from base
- 9mm hole (approx .35 inch)
|
|
RAM Handlebar Mount for Magellan Roadmate 360, 500 Plus, 700, 760 & 800
Part Number: GR57H |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Magellan Roadmate series. The kit includes the diamond base, a medium arm, the U-bolt handlebar mount and the screw kit for the Magellan Roadmate. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
|
|
RAM Suction Cup Mount for the Magellan Roadmate 360, 500 Plus, 700, 760 & 800.
Part Number: GR57S |
$38.00 |
|
|
|
|
|
|
This kit provides great flexibility in mounting your GPS unit. You can mount it at any angle, it won't slip and it disconnects quickly. The rubber ball mounting system absorbs vibration and doesn't buzz or wiggle when tightened securely.
This picture shows the basic RAM Handlebar Mount kit for the Magellan Roadmate series.The kit includes the cradle, the diamond base, a medium arm, the U-bolt handlebar mount and the screw kit for the Magellan Roadmate. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
This kit is designed to mount to the windshield of your car.
|
|
RAM Handlebar Mount for Magellan SportTrack
Part Number: GRSTKH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for the Magellan SportTrack. The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM Handlebar Mount without Cradle
Part Number: GRBH |
$32.00 |
|
|
|
|
The RAM Handlebar Mount without Cradle includes these items:
- Diamond base with mounting ball GRAD
- Medium arm GRANA
- U-bolt handlebar mount adapter GRAH
This Ram Handlebar Mount is most useful for mounting a Touratech GPS Mount on your handlebars. The diamond base is easy to adapt to any number of accessories. Most of the RAM cradles fit the diamond base.
- Diamond base 1 15/16" holepattern (48.5mm)
- U-bolt fits 3/4" to 1" bar
- Clamp arm is 3 1/2 inches
| |
|
RAM Universal Motorcycle Mount - 1 Ball ( 068-0233 )
Part Number: GRA1BJ |
$19.00 |
|
|
|
|
|
|
Universal mount fits to clutch perch (or brake perch) on most motorcycles. One 1" ball on a vertical post. Fits all 1" RAM arms. Includes Screws, spacers, washers. Metric and american screws provided. Please (see dimensions and "Kit Photo" ----->).
- Includes spacers (3/8" long)
- Includes 2X M6X50mm screws
- includes 2X 1/4-20 X 2" screws
|
|
RAM Handlebar Mount without Cradle CHROME
Part Number: GRBH-C |
$97.00 |
|
|
|
|
The RAM Handlebar Mount without Cradle CHROME includes these items:
- Diamond base with mounting ball GRAD (CHROME)
- Medium arm GRANA (CHROME)
- U-bolt handlebar mount adapter GRAH (CHROME)
This Ram Handlebar Mount is most useful for mounting a Touratech GPS Mount on your handlebars. The diamond base is easy to adapt to any number of accessories. Most of the RAM cradles fit the diamond base.
- Diamond base 1 15/16" holepattern (48.5mm)
- U-bolt fits 3/4" to 1" bar
- Clamp arm is 3 1/2 inches
| |
|
RAM Handlebar Mount without Cradle, Short Arm
Part Number: GRBSH |
$32.00 |
|
|
|
|
|
|
This Ram Handlebar Mount is most useful for mounting a Touratech GPS Mount on your handlebars. The diamond base is easy to adapt to any number of accessories. This kit includes a diamond base with mounting ball, a short arm and the u-bolt handlebar mount adapter.
- Diamond base 1 15/16" holepattern (48.5mm)
- U-bolt fits 3/4" to 1" bar
- Clamp arm is 1 3/4 inches
|
|
RAM Universal Motorcycle Mount - 2 Ball ( 068-0234 )
Part Number: GRA2BJ |
$29.00 |
|
|
|
|
|
|
Universal mount fits to clutch perch (or brake perch) on most motorcycles. This mount contains two balls, one with a vertical post, and one with a rearward facing horizontal post. Includes Screws, spacers, washers. Metric and american screws provided. Please (see dimensions and "Kit Photo" ----->). This part is same as GRA1BJ + GRA1BJ-2
- Includes spacers (3/8" long)
- Includes 2X M6X50mm screws
- includes 2X 1/4-20 X 2" screws
|
|
RAM Handlebar Mount for a PDA
Part Number: GRPDA |
$45.00 |
|
|
|
|
|
|
This is a RAM Handlebar Mount kit for a Personal Digital Assistant (PDA). It is not built for any specific model. The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM 2nd Ball for GRA1BJ
Part Number: GRA1BJ-2 |
$15.00 |
|
|
|
|
|
|
- Fits all of the RAM one-inch ball clamps
- Same as GRAHEX except with countersunk screw
- Thread: 1/4-20
Notes for attachment to GRA1BJ: Hex socket engagement with the screw coming in from the backside prevents torque on the ball from un-screwing the ball.
|
|
RAM Handlebar Camera Mount
Part Number: GRCH |
$39.00 |
|
|
|
|
|
|
This is the RAM Handlebar Mount kit for mounting a still or video camera. The mount adapter contains a 1/4-20 screw that is a standard thread for tripod mounting on cameras. The kit includes the mounting adapter, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
|
|
RAM Universal Motorcycle Mount - 2 Ball CHROME
Part Number: GRA2BJ-C |
$49.00 |
|
|
|
|
|
|
Universal motorcycle mount adds on to clutch or brake perch on most motorcycles. BRIGHT chrome plated Aluminum. 1-inch Ball fits all other 1” RAM parts. Same parts as GRA1BJ-2 except in chrome.
- Includes 2X Stainless Steel M6X50mm screws
- Includes 2X Stainless Steel 1/4-20 X 2" screws
- Includes 2X 1/2" long spacers
|
|
RAM Cradle for Apple iPod
Part Number: GRIPDCR |
$15.00 |
|
|
|
|
|
|
This RAM Cradle holds the Apple iPod on your handlebars. Take your tunes with you wherever you go. The kit includes the cradle, the diamond base, a medium arm and the U-bolt handlebar mount. This kit will mount to handlebars up to 1" in diameter. Larger U-bolts are available for different handlebar diameters.
- Dimensions: L: 4.0" xW: 2.44" x TH: 0.75"
- no lower port access (u-cut: 25" X 1.00")
This RAM Cradle is designed to hold the following Apple iPod units:
With Firewire Connection:
- Apple iPod 5GB
- Apple iPod 10GB
With Dock Connection:
- Apple iPod 10GB Generation 2
- Apple iPod 15GB Generation 2
- Apple iPod 30GB Generation 2
- Apple iPod 15GB Generation 3
- Apple iPod 20GB Generation 3
- Apple iPod 4
|
|
RAM Short Arm ( 068-0230 )
Part Number: GRASA |
$15.00 |
|
|
|
|
|
|
This RAM Short Arm lets you attach any number of RAM Mounts to your bike. Also available in Chrome.
- 1.75 inches center-to center
- Fits all B-size balls (1 inch)
- Available in CHROME: see GRASA-C
|
|
RAM Chrome Short Arm
Part Number: GRASA-C |
$40.00 |
|
|
|
|
|
|
1.75 inches center-to center
fits all RAM one-inch ball accessories
|
|
RAM Normal Arm
Part Number: GRANA |
$15.00 |
|
|
|
|
|
|
This RAM Normal Arm lets you attach any number of RAM Mounts to your bike. Also available in Chrome.
- 3.5 inches center-to center
- fits all B-size balls (1 inch)
- Available in CHROME: GRANA-C
|
|
RAM Chrome Normal Arm
Part Number: GRANA-C |
$40.00 |
|
|
|
|
|
|
3.5 inches center-to center
fits all RAM one-inch ball accessories
|
|
RAM Long Arm ( 068-0232 )
Part Number: GRALA |
$19.00 |
|
|
|
|
|
|
This RAM Long Arm lets you attach any number of RAM Mounts to your bike.
- 5.25 inches center to center
- Fits all 1 inch balls
|
|
RAM Camera Ball for TINY cameras
Part Number: GRABALL |
$12.00 |
|
|
|
|
|
|
This RAM Camera Ball is a 1 inch RAM ball with a standard 1/4-20 male thread. This will screw into to cameras, tripods (and other items with this thread). When used on a motorcycle, we recommend its use ONLY for tiny cameras. For larger cameras, use GRABAL2.
- 1/4-20 camera thread
- Screw is Aluminum
- Recommend only for very small cameras
|
|
RAM Camera Mount Adapter ( 068-0006 )
Part Number: GRABAL2 |
$15.00 |
|
|
|
|
|
|
The RAM Camera Mount Adapter is a standard 1 inch ball with a 1/4-20 thread extending from a flat round base. This thread fits the tripod mounting receptacle on most cameras.
- Standard1/4"-20 camera thread extending from flat base
- Screw is Stainless Steel
- Very strong
|
|
RAM Mount Adapter with 2X6 base
Part Number: GRA2X6 |
$15.00 |
|
|
|
|
|
|
This 2 x 6 RAM Mount Adapter plate gives you the ultimate flexibility in mounting just about anything you can imagine with a RAM mount system.
2 inch X 6 inch flate plate surface allows many mounting possibilities.
- Fits all of the one-inch clamps
- Many holes provided
- Made of cast Aluminum
|
|
RAM Aircraft Yoke Mount Adapter ( 068-0004 )
Part Number: GRAYOK |
$28.00 |
|
|
|
|
|
|
RAM Aircraft Yoke Adapter is an odd looking device designed primarily for aircraft application, but if it works for you, it works!
- fits all RAM one inch ball clamps
- perfect for airplane yoke attachment
- fits: GRANA, GRASA, GRALA and chrome models too.
|
|
RAM Mount Adapter Kit ( 068-0235 )
Part Number: GRA108 |
$20.00 |
|
|
|
|
|
|
Uses band clamp to attach to1.5 inch to 2 inch diameter bar.
|
|
RAM Mount Adapter for Garmin StreetPilot & StreetPilot Color
Part Number: GRSPA |
$18.00 |
|
|
|
|
|
|
Fits Greyscale and Old Colormap only. This part can be used as a bolt-on base for other mounting options. - Made of cast aluminum
- Concave base
- See link to dimensions at right---->
|
|
RAM Round Base w/ Double Ball
Part Number: GRAB2 |
$25.00 |
|
|
|
|
|
|
2-7/16" round basetriangular hole patternbase can be drilled for other patterns
|
|
RAM Hex Ball
Part Number: GRAHEX |
$15.00 |
|
|
|
|
|
|
One inch RAM ball on an Aluminum, internally threaded post. A steel bolt used inside adds strength to the post. We like this useful part.
- 1/4-20 threaded hole, 1/2 inch deep
- 7/16 inch hex flats
- Aluminum
|
|
RAM Hex Ball, M6 Metric threaded hole
Part Number: 068-0019 |
$12.00 |
|
|
|
|
|
|
One inch RAM ball on an Aluminum, internally threaded post. We like this useful part.
- M6 threaded hole, 1/2 inch deep
- 11mm hex flats
- Aluminum post
|
|
RAM 3-Ball Adapter
Part Number: GRA3B |
$30.00 |
|
|
|
|
|
|
connect three RAM arms together
angle 120 degrees apart
3/8+ (10mm+) hole thru center
center height: 1.187 inches
|
|
RAM Double Ball
Part Number: GRADB |
$12.00 |
|
|
|
|
|
|
The RAM Double Ball is two 1 inch balls attached with an aluminum rod. This can let you attach two arms in series for even greater length and flexibility.
- connect two RAM arms together
- more length
- other angles
- Ball-to-ball center distance =1.75 inches
|
|
RAM Screw Kit to attach a GRAB to a StreetPilot III
Part Number: GRSPB |
$7.00 |
|
|
|
|
|
|
Set of 4 stainless steel countersunk screws with RAM's special shouldered stainless steel nuts.Used for attaching a GRAB to OEM cradles. Looks nicer than the Nyloc nuts.
countersunk screws go into the GARMIN cradle. RAM's special shouldered nuts fit in the GRAB base.
|
|
RAM Radar Detector Holder
Part Number: GRARD |
$12.75 |
|
|
|
|
|
|
- adhesive-backed steel plate attaches to Radar Detector
- Mount has a super-strong rare-earth magnet
- Includes rectangular adhesive steel plate 1.5" X 2"
- includes round steel plate .75"
- Requires diamond base GRAD to be used with the RAM system. Please note: complete mount systems GRBH and GRBSH include item "GRAD"
|
|
Chrome 1 Inch Handlebar Clamp
Part Number: GCLMP1 |
$15.00 |
|
|
|
|
|
|
Fits 1.00 inch bar ONLY
Works well with item GRAHEX
See also GRASA-C and GRANA-C
|
|
RAM BigScreen Magnifier
Part Number: GRMAG1 |
$38.00 |
|
|
|
|
|
|
Magnifier and flexible arm for tired eyes. Fits between diamond base (item GRAD) and device cradle. 1/4 inch malleable aluminum flex support holds position of magnifier steady in most conditions.
- 7-inch flex-arm
- can be shortened
|
|
1.2 in SS U-Bolt for Answer and Magura 1-1/8" Bars
Part Number: GCU1P2 |
$4.00 |
|
|
|
|
|
|
Fits the 1-1/8" center section of Answer Pro-Taper and Magura X-Line handlebars. Also fits BMW R1200GS 28mm steel handlebar.
- Stainless Steel U-Bolt
- With 2 nyloc nuts (1/4-20 thread)
- Fits Handlebar Base GRAH
|
|
1.3 inch SS U-Bolt for Harley 1 1/4" FATBAR
Part Number: GCU1P3 |
$6.00 |
|
|
|
|
|
|
Primarily used for Harley's 1-1/4 inch "FATBAR".
- Stainless Steel U-bolt
- With 2 nyloc nuts (1/4-20 thread)
- Fits Handlebar Base GRAH
|
|
RAM Small Aquabox - best protection for iPods and PDAs on a motorcycle
Part Number: GRASAB |
$35.00 |
|
|
|
|
|
|
Small size Aquabox, this is the correct size for holding an iPod Nano, iPod Mini or similar sized device.
Waterproof protection that doesn’t limit your ability to use your devices. RAM Aquaboxes provide the most waterproof and vibration absorbing environment for your iPod, PDA or other electronic device that is not designed to be out in the elements or in the heavy-vibration environment that is present on all motorcycles.
Inside Dimensions:
2 3/8" Wide
4 5/8" Tall
1 1/8" Deep
- Soft, clear, pliable screen to operate buttons
- Cable access has self draining baffle design to keep moisture out.
- Fits any RAM Mounting System using round base GRAB or diamond base GRAD
- security holes for mini padlock.
- inexpensive Flex-Lens can be replaced easily if damaged
- Lifetime Warranty on all components other than Flex-Lens.
- Adjustable padded foam interior to provide additional shock and vibration protection.
For mounting the Aquabox to round handlebars on a motorcycle use mounting kit GRSP3H
|
|
RAM Medium Aquabox - best protection for iPods and PDAs on a motorcycle
Part Number: GRAMAB |
$37.00 |
|
|
|
|
|
|
Waterproof protection that doesn’t limit your ability to use your devices. RAM Aquaboxes provide the most waterproof and vibration absorbing environment for your iPod, PDA or other electronic device that is not designed to be out in the elements or in the heavy-vibration environment that is present on all motorcycles. See Kit Photo for cable access.
Inside Dimensions:
2 7/8" Wide
5 3/4" Tall
1 3/16" Deep
For mounting the Aquabox to round handlebars on a motorcycle use mounting kit GRSP3H.
- Soft, clear, pliable screen to operate buttons
- Cable access has self draining baffle design to keep moisture out
- Fits any RAM Mounting System using round base GRAB or diamond base GRAD
- Security holes for mini padlock.
- Inexpensive Flex-Lens can be replaced easily if damaged
- Lifetime Warranty on all components other than Flex-Lens.
- Adjustable padded foam interior to provide additional shock and vibration protection
|
|
RAM Handlebar Mount Cupholder with Swivel
Part Number: GRCUP |
$39.00 |
|
|
|
|
|
|
Complete handlebar mount including GRANA and GRAH
|
|
50mm bolt, 10mm spacer
Part Number: GCMXB |
$10.00 |
|
|
|
|
|
|
M8X50mm bolt and 10mm spacer. Spacer drops into counterbore. Normally the counterbore for an M8 bolt is 8mm deep. Hi-strength washer included.
|
|
Allen Security Screw for RAM Arms
Part Number: GCSEC |
$3.00 |
|
|
|
|
|
|
Requiring a tool is usually enough security to deter thieves from running off with your treasured and necessary RAM parts. Hex socket screw replaces thumbscrew for tamper resistance. Hex wrench included for convenience so you can keep it on the motorcycle for adjustments.
- Stainless steel
- Locknut
- Hex wrench included
- Fits GRASA, GRANA, GRALA
|
|
Maximum Security Screw for RAM Arms
Part Number: GCSEC2 |
$12.00 |
|
|
|
|
|
|
For those who prefer maximum security. Deter thieves from running off with your treasured RAM parts. Why not go all the way? Torx socket with tamper-resistant pin screw replaces thumbscrew for tamper resistance. Special wrench included for convenience so you can keep it on the motorcycle for adjustments.
- Security-Torx screw
- Stainless steel
- Locknut
- Matching wrench included
- Fits GRASA, GRANA, GRALA
|
|
Screw kit GRAB to StreetPilot III
Part Number: GCSPB |
$3.00 |
|
|
|
|
|
|
Set of 4 stainless steel countersunk screws with nyloc nuts. Used for attaching a GRAB to OEM cradles.
|
|
Stainless Steel Allen Bolt M8x45mm
Part Number: GC45MB |
$3.00 |
|
|
|
|
|
|
Longer bolt for handlebar clamp attachments. M8X1.25 fits most metric motorcycles. Bolt length is 45mm long (not counting head).
- M8X45mm long Allen bolt (M1.25 thread)
- Stainless Steel
- Hi-strength washer
|
|
12 in SS Redi-rod 1/4-20
Part Number: GCREDS |
$12.00 |
|
|
|
|
|
|
Use with "GRAB11", "GRAB9", or "GRAHEX". Normally used thru the spindle of sportbikes to mount a RAM ball.
- 1/4-20 thread
- 12 inches long
- Stainless Steel
- includes two SS jam nuts, one SS Nyloc Nut, and two large diameter SS washers, two normal SS washers.
|
|
12 in SS Redi-rod 3/8-16
Part Number: GCREDI |
$20.00 |
|
|
|
|
|
|
Normally used thru the spindle of sportbikes to mount a RAM ball such as GRAB11.
- 3/8-16 thread
- 12 inches long
- Stainless Steel
- includes two SS Nyloc Nuts, and two THICK SS washers
|
|
Mirror hole M10X1.25, 20mm long
Part Number: GC10125 |
$4.00 |
|
|
|
|
|
|
This bolt screws into the standard mirror thread of many motorcycles' un-used "mirror holes". It's an un-common thread size.
Note: Some motorcycles, Yamaha for example use a "left hand thread" on the right(?) side. We don't have any left hand thread bolts.
Notes regarding use with GRAB9: To insert this 10mm bolt into the 9mm hole, the hole must be enlarged slightly, which is easy to do with a round file. Care must be taken not to allow the large bolt head (17mm) or large washers to damage the GRAB9 as it is being tightened.
- M10X1.25 thread
- 20mm long
- With 2 washers
|
|
Bolt & Spacer for R1100RT, R1150RT, R1200RT
Part Number: GCR11B |
$10.00 |
|
|
|
|
|
|
Use with "GRAB11". Also fits with GRAB9
- Stainless Steel M8X50mm Bolt
- 13mm spacer
- Hi-strength washer
|
|